Infusion Syringe Pumps, Legato Syringe Pumps, Syringe Pumps and Fluid Handling
LEGATO 100 Infuse Only Syringe Pump
Infuse only single syringe pump. Accommodates syringes from 0.5ul to 60ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Product Enquiry
If you would like to send us an enquiry about this product, please click the button below, fill in the form and submit.
Product Enquiry
Product Enquiry
Please fill out the form if you would like to enquire about this product."*" indicates required fields
KD Scientific Legato® 100 Infuse Only Syringe Pump
Infuse only single syringe pump. Accommodates syringes from 0.5ul to 60ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Features:
- Holds one syringe from 0.5ul to 60ml
- Stall detection
- High resolution color touch screen
- Unparalleled ease of use
- Password protected touch display
- Run LED light on front panel
- Full metal chassis
- Built in syringe table
- Up to 30 lbs/13kg linear force
- Advanced microstepping techniques
- Built in RS485 interface
- USB port
- I/O & TTL interface
- Continuous mode of operation
- Spill dam
Technical Literature
| Legato 100 Series Manual |
| Legato 100 Series Quick Start Guide |
| KDS Legato® 100 Datasheet |
| KDS Legato® Family Datasheet |
| Declaration of Conformity for the Legato 100 Series Syringe Pumps |
| Accuracy: | ± 0.5% |
| Reproducibility | ± 0.05% |
| Syringes (Min/Max) | 0.5 ul to 60ml |
| Flow Rate: | Minimum (0.5 ul syringe): 1.28 pl/min Maximum (10ml syringe): 25.99 ml/min Maximum (60ml syringe): 88.28 ml/min |
| Display | 4.3 WQVGA TFT Color Display with Touchpad |
| Non-Volatile Memory | Stores all Settings |
| Connectors: | RS485 – IEEE-1394 6 pos USB – Type B I/O & TTL – 15 pin D-Sub Connector |
| Linear Force (Max) | 13.6 kg (30 lbs) @ 100% Force Selection |
| Drive Motor | 0.9 Stepper Motor |
| Motor Drive Control | Microprocessor with 1/16 microstepping |
| Number of Microsteps per one rev.of Lead Screw |
15,360 |
| Step Revolution | 0.069 um/step |
| Step Rate – Minimum | 27.5 sec/ustep |
| Step Rate – Maximum | 26 usec/ustep |
| Pusher Travel Rate – Minimum | 0.15 um/min |
| Pusher Travel Rate – Maximum | 159 mm/min |
| Power | 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse |
| Dimensions | 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in) |
| Weight | 2.66 kg (5.9 lbs) |
| Operating Temperature | 4 degree C to 40 degree C (40 degree F to 104 degree F) |
| Storage Temperature | -10 degree C to 70 degree C (14 degree F to 158 degree F) |
| Humidity | 20% to 80% RH non condensing |
| Mode of Operation | Continuous |
| Classification | Class 1 |
| Pollution Degree | 1 |
| Installation Category | 11 |
| Regulatory Certification | CE, UL, CSA, CB Scheme, EU RoHS |
