Infusion/Withdrawal Syringe pumps, Legato Syringe Pumps, Programmable, Syringe Pumps and Fluid Handling
Legato® 185 Single Syringe, Programmable Touch Screen, Picoliter, Infusion/Withdrawal Pump
Single syringe infuse/withdraw optimized for low flow with program options for 2 programs. 50 steps each. Accommodates syringes 0.5 µl to 60 ml. User definable flow rates with selectable target volume or time values to control the total infusion volume.
Product Enquiry
If you would like to send us an enquiry about this product, please click the button below, fill in the form and submit.
Product Enquiry
Product Enquiry
Please fill out the form if you would like to enquire about this product."*" indicates required fields
KD Scientific Legato® 185 Syringe Pump Single Syringe, Programmable Touch Screen, Picoliter, Infusion/Withdrawal Pump
Single syringe infuse/withdraw optimized for low flow with program options for 2 programs. 50 steps each. The Legato® 185 Syringe Pump accomodates syringes 0.5ul to 60ml and offers user definable flow rates with selectable target volume or time values to control the total infusion volume.
Features:
- Holds one syringe from 0.5ul to 60ml
- High resolution colour touch screen
- Unparalled ease of use
- Touch pad “lock” feature
- LED light on front panel
- Full metal chassis
- Built in syringe table
- Up to 30 lbs linear force
- Advanced microstepping techniques
- Built in RS485 interface
- USB port
- I/O & TTL interface
- Continuous mode of operation
- Spill dam
- Programmable
Technical Literature
| Legato 100 Series Manual |
| Legato 100 Series Quick Start Guide |
| KDS Legato® Family Datasheet |
| Declaration of Conformity for the Legato 100 Series Syringe Pumps |
| Accuracy: | ± 0.35% |
| Reproducibility | ± 0.05% |
| Syringes (Min/Max) | 0.5 ul to 60ml |
| Flow Rate: | Minimum (0.5 ul syringe): 0.54 pl/min Maximum (60ml syringe): 39 ml/min |
| Display | 4.3 WQVGA TFT Color Display with Touchpad |
| Non-Volatile Memory | Stores all Settings |
| Connectors: | RS485 – IEEE-1394 6 pos USB – Type B I/O & TTL – 15 pin D-Sub Connector |
| Linear Force (Max) | 13.6 kg (30 lbs) @ 100% Force Selection |
| Drive Motor | 0.9 Stepper Motor |
| Motor Drive Control | Microprocessor with 1/16 microstepping |
| Number of Microsteps per one rev.of Lead Screw |
20,480 |
| Step Revolution | 0.031 um/ustep |
| Step Rate – Minimum | 27.5 sec/ustep |
| Step Rate – Maximum | 26 usec/ustep |
| Pusher Travel Rate – Minimum | 0.02 um/min |
| Pusher Travel Rate – Maximum | 71.55 mm/min |
| Power | 100-240 VAC: 50/60 Hz, 50 W, 0.5 A fuse |
| Dimensions | 22.6 x 19.05 x 15 cm (9 x 7.5 x 5 in) |
| Weight | 2.66 kg (5.9 lbs) |
| Operating Temperature | 4 degree C to 40 degree C (40 degree F to 104 degree F) |
| Storage Temperature | -10 degree C to 70 degree C (14 degree F to 158 degree F) |
| Humidity | 20% to 80% RH non condensing |
| Mode of Operation | Continuous |
| Classification | Class 1 |
| Pollution Degree | 1 |
| Installation Category | 11 |
| Regulatory Certification | CE, UL, CSA, CB Scheme, EU RoHS |
