70 Microdialysis Bolt Catheter
For bolt implantation
“Gold-Tip” visible on CT
For early detection of brain ischemia and vasospasm
Reinforced shaft
Product Enquiry
If you would like to send us an enquiry about this product, please click the button below, fill in the form and submit.
Product Enquiry
Product Enquiry
Please fill out the form if you would like to enquire about this product."*" indicates required fields
M Dialysis 70 Microdialysis Bolt Catheter
- For bolt implantation
- “Gold-Tip” visible on CT
- For early detection of brain ischemia and vasospasm
- Reinforced shaft
The 70 Microdialysis Bolt Catheter is designed for implantation in brain tissue through the IM2 Bolt kit for 2 brain probes or the IM3 Bolt Kit for 3 brain probes from Integra. The catheter has a 130 mm long shaft and a membrane length of 10 mm. The shaft has a reinforced stainless steel section measuring 16.5 mm in length. This reinforcement is located where the compression screw of the bolt is to be tightened.
The tip of the Catheter contains a gold tread, which makes it visible on a CT-scan in order to locate the exact position of the catheter in the brain.
The catheter inlet tubing is connected to a Microdialysis Pump and the outlet ends in a microvial which collects the sample. The samples can be analyzed in the ISCUSflex Microdialysis Analyzer for Glucose, Lactate, Pyruvate, Glycerol, Glutamate and Urea or sent to the laboratory for further analysis.
Ordering information for 70 Bolt Catheter
| Ref. No. | |
| P000131 | 70 Microdialysis Bolt Catheter |
Accessories |
|
| P000001 | Microvials |
| P000028 | Microvial Rack |
| P000154 | Microvials in Rack Sterile |
Product Downloads
| Material | Length (mm) | Diameter (mm) | |
| Shaft | Polyurethane | 130 | 0.9 |
| Membrane | Polyamide | 10 | 0.6 |
| Inlet Tubing ID/OD | Polyurethane | 600 | 0.15/1.0 |
| Outlet Tubing ID/OD | Polyurethane | 220 | 0.15/1.0 |
| Membrane Cut-off: Approx. 20,000 Daltons | |||
