TRIO™ MPC-145 System

3-axis / 0-90 Diagonal Micromanipulator System

The TRIO MPC-145 System consists of the MPC-100 controller and one or two MP-845 micromanipulators.

The new MP-845 micromanipulator features construction based on the lead screw design of the TRIO-245, but with the addition of precision cross-roller bearings for even tighter tolerances. A 25 pin connector insures future compatibility with our other controllers. Available in aluminum or stainless steel (see Stainless MP-845 tab above) the MP-845 is a highly stable 3-axis manipulator with 25 mm of travel on each axis. The TRIO MPC-100 controller gives the MP-845 a synthetic 4th axis that can be set in software to any angle between 0 and 90 degrees for diagonal movement. Based on a lead-screw design with a smaller overall size and footprint than most manipulators, the MP-845 is ideal for applications that require 2 pipettes in one setup or for setups where space is limited.

The compact design of the integrated Rotary Optical Encoder (ROE) controller requires minimal bench space; provides quiet, fan-free operation; and is easy to use. No rack mounted controller is required. Position coordinates, in relative or absolute values, are displayed directly on the ROE. The TRIO MPC-100 uses a logarithmic acceleration algorithm that eliminates the need for speed selection. As the knobs on the ROE are turned faster, acceleration ramps up. This allows for smooth and intuitive motion control of electrode position without the need to stop and change speeds or lift your hand from the controller. When not moving, the motors are powered down, reducing electrical noise in the system to unmeasurable levels which keeps the motors cool to eliminate thermal drift.

Five conveniently located buttons control all the functions you will need in normal operation. Press and hold the [WORK] button to quickly store a work position; pressing [WORK] after this will return the manipulator to the same location. [HOME] sends the manipulator to a second position, often set for a point furthest from the microscope, which is useful for rapid pipette exchange. Pressing [SPEED] allows the selection of one of 4 speed ranges. With practice, there is no need to ever change speeds, however, we have included three low speed ranges for those who work at very high magnification. Holding [SPEED] for three-seconds will lock the knobs out, to prevent accidental movement. Display coordinates can toggle between relative and absolute by pressing the [RELATIVE] button; holding the button down will zero the relative coordinates. Finally, [PULSE] activates a pulse movement mode that produces small, rapid bursts of motion that can be advantageous for cell penetration with sharp electrodes. Hold [PULSE] for three-seconds to set or modify the 4th axis angle between 0 and 90 degrees.

Designed with maximum flexibility in mind, a DIP switch on the controller changes the directional movement of the ROE knobs to accommodate the preference of the user. A Y-axis lockout function (accessible by DIP switch) is also available, allowing X/Z-only axial movement during HOME and WORK repositioning. The TRIO comes standard with a universal mounting system suitable for the most popular headstages or pipette holders.

Features: TRIO MPC-100 Controller

• Controls one or two manipulators
• Sub-micron (less than 100 nm) resolution
• User selectable angle from 0 – 90 degrees via ROE input
• Fast movement with a top speed of 3 mm/sec (while homing)
• Compact, fanless, user-friendly ROE controller preserves bench and rack space
• Push button control of multiple functions – WORK, HOME, LOCK, PULSE and RELATIVE
• DIP switches on ROE select direction of movement produced by turn of ROE knob
• USB interface for computer control

Features: MP-845 Mechanical

• Now also available in thermally stable stainless steel (See tab above)
• Mechanically robust construction for high stability
• Precision cross-roller bearings
• Three independent axes – 25 mm orthogonal travel in X, Y and Z
• Carries up to a kilogram
• Suited for in vitro and in vivo electrophysiological recording
• Universal mounting system for headstage or pipette holder

Stainless MP-845

The MP-845 manipulator is now also available in stainless steel! The standard version of the MP-845 has virtually no drift in its motor and bearing assemblies. The last remaining hurdle is that of thermal drift caused by the expansion and contraction of the aluminum body of the manipulator. By utilizing a stainless steel with very low coefficient of expansion, the MP-845S is simply the lowest drift manipulator available on the market. The added mass of the stainless steel body has the additional benefit of dampening out vibration, giving the stainless MP-845S the silkiest movement of any manipulator.

Because low expansion stainless steels do have some ferric content, the stainless MP-845S is PVD coated in titanium nitride, giving it its distinctive gold color. This coating will ensure that the stainless MP-845S will resist corrosion caused by exposure to salt solutions in a lab environment.

Ordering Information

¹ Suitable for multielectrode probes.
² Risers can be combined to achieve desired height.

TRIO Bundled Systems

Microscope Models – Please add scope suffix when ordering.

Z25 – Zeiss Axioskop 2 FS
Z45 – Zeiss Axio Examiner
N65 – Nikon FN1
L30 – Leica DMLFS
L35 – Leica DM6000FS
Y51 – Olympus BX51WI
Y51-FD – Olympus BX51WI (includes focus drive add $1,600 to price)
Y53 – Olympus BX53/63

If your microscope model is not listed, please contact Linton Instrumentation.

SAN FRANCISCO

Manual – MT-1000 with manual X-Y translator, micromanipulators
Includes 2 motorized TRIO micromanipulators, one MPC-100 controller, one MT-500 manual X-Y translator, one MT-150 chamber column, two micromanipulator stands (without linear slide)

Motorized – MT-2800 with motorized X-Y translator, micromanipulators
Includes TRIO MPC-145-2 system with 2 motorized micromanipulators, the MT-800 motorized X-Y translator and ROE controller, one MT-150 chamber column, two micromanipulator stands (without linear slide)

ALCATRAZ

Manual – MT-1078 TRIO manual X-Y translator, micromanipulators
Includes motorized TRIO micromanipulators, one MPC-100 controller, the MT-500 manual X-Y translator, one MT-78-FS fixed stage platform and insert

Motorized – MT-2878 with motorized X-Y translator, micromanipulators
Includes TRIO MPC-145-2 system with 2 motorized micromanipulators, the MT-800 motorized X-Y translator and ROE controller, one MT-78-FS fixed stage platform and insert

Technical Information and Manuals

Technical Information
MP-845: Mechanical Drawing

User Manuals
TRIO MPC-145 Operation Manual
TRIO MPC-145 Quick Reference
TRIO MPC-145 External Control Quick Reference

Product Information
Download Sales Flyer